Filter
Top Products
© National Instruments Corporation 5-1 NI PXI-4224 User Manual
5
Using the NI PXI-4224
This chapter describes how to program the NI PXI-4224, using
DAQ Assistant or LabVIEW, and how to calibrate the device.
Developing Your Application
This section describes the software and programming steps necessary to
use the NI PXI-4224. For more information about a particular software or
programming process, refer to your ADE documentation.
Typical Program Flow Chart
Figure 5-1 shows a typical program flow chart for creating an AI voltage
channel, taking a measurement, and clearing the data.
Note For more information about creating tasks and channels in MAX, refer to Chapter 3,
Configuring and Testing.