Filter
Top Products
11
in
out
The C45 Audio Control Center has assignable Inputs. Be-
fore the Balanced and Phono Inputs can be used, they must
be first selected in the Setup Mode, refer pages 15, 17 and
18.
1. Connect Audio Cables from the McIntosh C45 RF and
LF Balanced OUTPUTS to the McIntosh Power Ampli-
fier Balanced INPUTS.
Note: The unbalanced RF and LF Audio OUTPUTS and
unbalanced Power Amplifier Inputs may be used
instead of the Balanced Connections.
2. Connect Audio Cables from the McIntosh CD Player
Balanced Audio Outputs to the C45 R and L BAL-
ANCED INPUTS.
McIntosh DVD-Audio Player
McIntosh Power Amplifier
McIntosh CD Player
How to Connect for Two Channel Operation
How to Connect for Two Channel Operation
Tape Deck
Turntable
Note: The unbalanced Audio Outputs and CD2 INPUTS
may be used instead of the Balanced Connections.
3. Connect Audio Cables from a McIntosh DVD-Audio
Player 2CH Outputs to the C45 DVD INPUTS.
4. Connect an Audio Cable from a Turntable to the C45
PH/AUX INPUTS and the Turntable Ground Connec-
tion to the GND grounding post.
5. Connect an Audio Cable from the C45 TAPE OUT-
PUTS to the Record Inputs of a Tape Recorder and
from the C45 TAPE INPUTS to a Tape Recorder Out-
puts.
6. Connect the C45 Power Cord to a live AC outlet.