35
Basic versionSimple version Information
ENGLISHDEUTSCHFRANÇAISITALIANOESPAÑOLNEDERLANDSSVENSKA
Advanced version
ENGLISHDEUTSCHFRANÇAISITALIANOESPAÑOLNEDERLANDSSVENSKA
Connect
Front A/B connection
The second set of front speakers can be connected to the FRONT B/HEIGHT terminals.
In this case, set “Front Speaker Setup” (vpage58) of “Speaker Setup” to “B” or “A+B”.
FL(A)FL(B) FR(B)FR(A)
SW
For surround playback of a multichannel source, if you connect the center speaker, surround speakers,
surround back speakers and subwoofers, 7.1-channel playback is available.
Front speakers can be used separately, depending on the speaker’s specifications or playback source such
as front speakers (A) for multichannel playback and front speakers (B) for 2-channel playback (vpage58
“Front Speaker Setup”).
NOTE
When using speakers A and B at the same time, check the impedance of the connected speakers
(vpage4).
For speaker impedance and speaker cable connections, see page 4.
5.1-channel connection
For 5.1-channel playback, set “Amp Assign” in “Set up speakers” (vpage37) to “Normal”.
FL FR
C
SW
SL
SR