Filter
Top Products
31
Advanced versionSimple version Information
ENGLISHDEUTSCHFRANÇAISITALIANOESPAÑOLNEDERLANDSSVENSKA
Basic version
ENGLISHDEUTSCHFRANÇAISITALIANOESPAÑOLNEDERLANDSSVENSKA
Stereo playback
This is the mode for playing in stereo. The tone can be adjusted.
• Sound is output from the front left and right speakers and subwoofer.
• If multichannel signals are input, they are mixed down to 2-channel
audio and are played.
1
Playing the source (vpage 23 –
27).
2
Press STEREO.
Stereo playback begins.
Direct playback
Sound recorded in source is played as is.
• Surround back signals or front height signals are not created.
• In this mode, the following items cannot be adjusted.
• Tone (vpage53) • MultEQ
®
(vpage53)
• Dynamic EQ
®
(vpage54) • Dynamic Volume
®
(vpage54)
• M-DAX (vpage55)
1
Playing the source (vpage 23
– 27).
2
Press P.DIRECT to select the
direct mode.
• If PURE DIRECT on the main unit is
pressed, the same function as with the
remote control unit can be obtained.
• Each time P.DIRECT is pressed, the direct mode is switched.
Source Direct
This mode plays back tracks at high sound
quality without passing through the sound quality
adjustment circuits.
Pure Direct
z
This mode plays back tracks at the closest to the
original sound quality.
Auto
This mode detects the type of input digital signal,
and automatically selects the corresponding mode
for playback.
zThe following circuits that affect sound quality are set to off.
• Main unit’s display circuit (The display is turned off.)
• Analog video input/output circuit
• To cancel, press P. DIRECT again.
• Video signals are only output when HDMI signals are played in the
PURE DIRECT mode.
NOTE
When in the PURE DIRECT mode, the menu screen is not displayed.
Dolby Virtual Speaker/Dolby
Headphone playback
Dolby Virtual Speaker mode
This delivers a full surround sound experience from two stereo
speakers.
• Sound is output from the front left and right speakers.
• If multichannel signals are input, they are mixed down to 2-channnel
audio.
1
Playing the source (vpage 23 –
27).
2
Press SURR. to select “DOLBY
VS”.
Dolby Headphone mode
You can enjoy listening to multi-channel surround sound through
headphones using this mode.
Press SURR. to select the Dolby
Headphone mode.
• Each time SURR. is pressed, the Dolby Headphone mode is
switched.
DOLBY
HEADPHONE
This is the surround mode for listening with
headphones.
The surround sound field is played through regular
headphones.
DOLBY HP
BYPASS
The sound is played in the normal stereo mode
rather than the surround mode when listening with
headphones.
DOLBY HP
PLg Movie
This mode is best suited for movie sources.
DOLBY HP
PLg Music
This mode is best suited for music sources.
NOTE
• The surround mode returns to the previous setting as soon as the
plug is removed from the jack.
• In headphone mode, Tone Control is not available.
• You can select Dolby HP PLⅡ Movie or Dolby HP PLⅡ Music
when a 2-channel source is played back.