Filter
Top Products
51
Audio Adjust
Setting items Setting details
Dynamic EQ
®
Solve the problem of
deteriorating sound quality
as volume is decreased
by taking into account
human perception and
room acoustics. Works with
MultEQ
®
.
ON : Use Dynamic EQ
®
.
OFF : Do not use Dynamic EQ
®
.
or is displayed when set to “ON”.
Reference Offset
Audyssey Dynamic EQ
®
is
referenced to the standard
film mix level. It makes
adjustments to maintain
the reference response
and surround envelopment
when the volume is turned
down from 0 dB. However,
film reference level is not
always used in music or
other non-film content.
Dynamic EQ
®
Reference
Level Offset provides three
offsets from the film level
reference (5 dB, 10 dB, and
15 dB) that can be selected
when the mix level of the
content is not within the
standard.
0dB (Film Ref) : This is the default setting and should be used when
listening to movies.
5dB : Select this setting for content that has a very wide dynamic range,
such as classical music.
10dB : Select this setting for jazz or other music that has a wider dynamic
range. This setting should also be selected for TV content as that is usually
mixed at 10 dB below film reference.
15dB : Select this setting for pop/rock music or other program material
that is mixed at very high listening levels and has a compressed dynamic
range.
Setting is enabled when “Dynamic EQ
®
” is “ON” (vpage51).
Setting items Setting details
Dynamic Volume
®
Solve the problem of large
variations in volume level
between TV, movies and
other content (between
quiet passages and
loud passages, etc.) by
automatically adjusting to
the user’s preferred volume
setting.
Heavy : Most adjustment to loudest and softest sounds.
Medium : Medium adjustment to loudest and softest sound.
Light : Least adjustment to loudest and softest sounds.
OFF : Do not use “Dynamic Volume
®
”.
•
is displayed when set to “Heavy”,
“Medium” or “Light”.
•If “Dynamic Volume
®
” is set to “Yes” in
Auto Setup (vpage 15), the setting is
automatically changed to “Medium”.
•This can also be set by pressing DYN VOL.
Each time DYN VOL is pressed, the setting is changed as shown below.
Dynamic Volume : Heavy
Dynamic Volume : Medium
Dynamic Volume : OFF
Dynamic Volume : Light
Basic version
Advanced version
Information
Advanced version
BD