Filter
Top Products
20
Tuning in radio stations
Listening to FM/AM broadcasts
1
Press TUNER twice to switch the
input source to “TUNER”.
2
Press BAND to select “FM” or
“AM”.
FM
When listening to an FM broadcast.
AM
When listening to an AM broadcast.
TUNER
A1
FM 87.50MHz
Now Playing
AUTO
[
MEMORY
]
Band
Memory
[
T.MODE
] Mode[BAND]
[
PRESET+/-
] Preset
Tuning[
TUNING+/-
]
[
SEARCH
] Search
3
Tune in the desired broadcast
station.
q To tune in automatically (Auto tuning)
Press T.MODE to light the “AUTO” indicator on the display, then
use TUNING + or TUNING – to select the station you want to
hear.
w To tune in manually (Manual tuning)
Press T.MODE to turn off the display’s “AUTO” indicator, then
use TUNING + or TUNING – to select the station you want to
hear.
•You can also operate via the main unit.
In this case, perform the following operations.
Press BAND to select “FM” or “AM”.
Press ui to select the station you want to hear.
•If the desired station cannot be tuned in with auto tuning, tune it in
manually.
•When tuning in stations manually, press and hold TUNING + or
TUNING – to change frequencies continuously.
•The time (default : 30 sec) for which the menu are displayed can be
set at menu “Tuner” (vpage 60). Press uio p to return to
the original screen.
n Presetting radio stations (Manual preset)
Your favorite broadcast stations can be preset so that you can tune
them in easily. Up to 56 stations can be preset.
•Stations can be preset automatically at “Auto Preset”
(vpage63). If “Auto Preset” is performed after performing
“Manual preset”, the “Manual preset” settings will be overwritten.
1
Tune in the broadcast station you want to preset.
TUNER
A1
FM 87.50MHz
Now Playing
AUTO
[
MEMORY
]
Band
Memory
[
T.MODE
] Mode[BAND]
[
PRESET+/-
] Preset
Tuning[
TUNING+/-
]
[
SEARCH
] Search
2
Press MEMORY.
TUNER
A1
To store preset:
Select
A1-G8
[
MEMORY
][
1-8
][
SHIFT
]
[
MEMORY
]
Band
Memory
[
T.MODE
] Mode[BAND]
[
PRESET+/-
] Preset
Tuning[
TUNING+/-
]
[
SEARCH
] Search
3
Press SHIFT/TOP MENU to select the block (A to G) in
which the channel (1 to 8 per a block) is to be preset,
then press PRESET +, PRESET – or 1 – 8 to select the
preset number.
4
Press MEMORY again to complete the setting.
•To preset other stations, repeat steps 1 to 4.
Default settings
Block (A – G)
and
Channel (1 – 8)
Default Settings
A1 – A8
87.50 / 89.10 / 98.10 / 108.00 / 90.10 / 90.10 /
90.10 / 90.10 MHz
B1 – B8
522 / 603 / 999 / 1404 / 1611 kHz,
90.10 / 90.10 / 90.10 MHz
C1 – C8 90.10 MHz
D1 – D8 90.10 MHz
E1 – E8 90.10 MHz
F1 – F8 90.10 MHz
G1 – G8 90.10 MHz
Specify a name for the preset broadcast station
(Preset Name) (vpage63)
Basic version
Advanced version
Information
Basic version
vSee overleaf
BD