Filter
Top Products
18
Playback (Basic operation)
n Playing a Blu-ray Disc player/DVD player
(vpage19)
n Playing a CD player (vpage19)
n Tuning in radio stations (vpage20)
Selecting a listening mode (Surround mode)
(vpage24)
n Selecting the input source (vpage18)
n Adjusting the master volume (vpage19)
n Turning off the sound temporarily (vpage19)
Playback (Advanced operation) (vpage38)
Settings (vpage11)
Important information
Before starting playback, make the connections between the different
devices and the settings on the unit.
NOTE
Also refer to the operating instructions of the connected devices
when playing them.
Selecting the input source
Press the input source select button
(BD, DVD, SAT, TV, CD, TUNER or
M-XP) twice to be played back.
When an input source select button (BD, DVD,
SAT, TV, CD, TUNER or M-XP) is pressed
once, the unit switches to device selected
by the operating mode of the remote control.
If the input source select button is then
pressed again twice, the input source for the
unit is switched.
Select input source “AUX” to play back music from an audio system
connected to the AUX INPUT jack.
The input source “GAME” is selected to playback from a game device
connected to GAME connector of HDMI IN.
Select the input source “AUX” or “GAME” using one of the following
methods.
•“Source Select” menu
(“Using the “Source Select” menu” provided on the right)
•SOURCE d f button on the remote control unit
(“Using the SOURCE d f button on the remote control unit”
(vpage19))
•INPUT SELECTOR knob on the main unit
(“Using the knob on the main unit” (vpage19))
You can also use the following operation to select an input
source.
n Using the “Source Select” menu
Player
BD
DVD
CD
M-XPort
Video
SAT
TV
GAME
AUX
Tuner
TUNER
[ENTER] Enter[ ] Move
Source Select
The currently selected input
source is highlighted.
q Press 3.
Display the “Source Select” menu.
w Use uio p to select the input source,
then press ENTER.
The input source is set and the source
selection menu is turned off.
•Input sources that are not going to be used can be set ahead of time.
Make this setting at “Source Delete” (vpage59).
•To turn off the source selection menu without selecting an input
source, press 3 again.
•When 3 is pressed, the AMP-operation mode starts automatically
(vpage68).
Basic version
Advanced version
Information
Basic version
BD
vSee overleaf