Marantz NR1402 Home Theater System User Manual


  Open as PDF
of 99
 
33
C
SB
SL
SR
FL
FR
SW
IN
L
L
Power amplifier
6.1-channel (Surround back speaker) connection
If using only one surround back speaker (with a 6.1-channel
connection), connect to the “L” side of the FL/SBL/HL connector.
For speaker settings in this case, see “When 6.1ch (Surround back
speaker) installed” (vpage30).
To perform 6.1-channel playback using the surround back speaker,
set “Pre Assign” to “NORMAL” in steps 3 and 4 for “Set up “Pre
Assign”” (vpage35).
Also use the “Speaker Config.” setting (vpage 55) to set
“S.Back” to “1spkr”.
NOTE
•A power amplifier (sold separately) is required for this connection.
•For speaker cable connections, see C page 6 “Connecting the
speakers”.
•For speaker impedance, see page31.
Connect
Basic version
Advanced version
Information
Advanced version
 previous next