Filter
Top Products
3
ENGLISH
REMOTE CONTROL UNIT
q (Standby) button
Press to turn the unit's power on or set it to the standby mode.
(Operation is not possible if the unit is connected to the SR110,
the SR110's rear switch is set to SYSTEM and the CD110's
REMOTE CONTROL SELECTOR EXT/INT switch is at EXT.)
w DISPLAY button
Press to change what is shown on the display from the disc
information to the clock display, etc. (The clock display appears
only when the unit is used on its own.)
e SCROLL button
Press to scroll the text display of discs that support text.
r AMS button
Press to play the first 10 seconds of all the tracks on the disc in
sequence starting with the first track.
t Numeric buttons
Press to specify track numbers directly. These buttons cannot be
used with MP3 discs.
y REPEAT button
Press for repeat play. Each time the button is pressed, the mode
changes in the following sequence:
All track repeat fi 1-track repeat fi clear.
u RANDOM button
Press for random play to play the tracks in a random sequence.
i TIMER button
Press to set the timer and clock. (These settings can be performed
only when the unit is used on its own.)
o CD TEXT button
Press to switch what is shown on the display from disc information
to text when a CD-TEXT compatible disc is used.
!0 3 (Play) button
Press to start play.
!1 4, ¢ buttons
4 : Press to play from the start of the track now playing. When
they are pressed again within 1 second after it was
pressed the first time, play starts from the track before.
¢ : When pressed once, play starts from the next track.
!2 7 (Stop) button
Press to stop disc play.
!3 1, ¡ buttons
1 : Press to forward-search through the track now playing.
¡ : Press to reverse-search through the track now playing.
These buttons cannot be used during MP3 disc play.
!4 8 (Pause) button
Press to stop disc play temporarily.
!5 PROG. button
Press for program play.
This button cannot be used with MP3 discs.
!6 CANCEL button
Press to cancel a programmed track.