Filter
Top Products
Lowrance - LVR-250 Installation and Operation Instructions 7
Mounting gimbal for the VHF radio1.
Power supply cable with in built 7 Amp 2.
fuse
External speaker connection cable with
3.
white (+) wire and black (-) wire
GPS connection cable
4.
Two mounting knobs5.
Microphone bulkhead mount6.
Four self-tapping screws for the 7.
mounting gimbal
Four flat screws for the mounting
8.
gimbal
Four spring washers for the mounting
9.
gimbal
Four plain washers for the mounting
10.
gimbal
Four nuts for the mounting gimbal
11.
Two self-tapping screws for the 12.
microphone bulkhead mount
Two flat screws for the microphone
13.
bulkhead mount
Two spring washers for the
14.
microphone bulkhead mount
Two plain washers for the microphone
15.
bulkhead mount
Two nuts for the microphone bulkhead
16.
mount
Four M5x32 screws for recessed
17.
installation
Four nuts for the recessed installation
18.
Not pictured: Two plastic stoppers for the
recessed installation. Installation template.
One 7 Amp spare fuse in case of accidental
reverse of battery polarity. Base unit and
microphone. Protective cover.
Checklist
The following items should be supplied in the box. Check before starting the installation and
contact your dealer if an item is missing.
Note: An antenna is not provided. Consult your Lowrance dealer for advice if necessary.
1
3
4
2
6
5
7
8
9
10
11
12
13
14
15
16
17
18