Filter
Top Products
Lowrance - LVR-250 Installation and Operation Instructions 37
5-2-3 Acknowledgement of an Individual Incoming Call (INDIV)
The LVR-250 EU requires the operator to manually send an acknowledgement to the request-
ing radio.
Press ENT to send an acknowledgement or EXIT to cancel.
The LVR-250 US will automatically send an acknowledgement to the requesting radio within
10 seconds of receiving the call.
5-2-4 Recall the Most Recent Incoming Call (LAST)
This facility is useful and used frequently.
Press CALL to enter DSC mode. LAST CALL is automatically selected. Press ENT to display
1.
the contact details of the most recent incoming call. Press ENT to next screen.
Select the working channel and press ENT. (Note: Duplex channels cannot usually be
2.
called and are automatically eliminated from the suggested call list. If the call is to a
Coast Station, the radio will recognize this and select the correct channel.)
The radio summarizes the call details and asks for confirmation to send the call (SEND?).
3.
Press ENT to send the call, and continue as explained in Section 5-2-1.
5-2-5 Call a Group (GROUP)
Press CALL to enter DSC mode, then select GROUP. The radio displays the names of your 1.
groups.
Select the group that you want to call (the Group MMSI must be set before making the
2.
call). Then set the channel and continue as explained in Section 5-2-1.
Alternating
RD GROUP
055554444
ROUTINE
>SET CHANNEL
SELECT GROUP
>RD GROUP
GROUP #2
GROUP#3
DSC CALL
INDIVIDUAL
LAST CALL
>GROUP
RD GROUP
055554444
ROUTINE
>SEND?
BOBBY D
INDIVIDUAL
ROUTINE
>SEND?
BOBBY D
INDIV.
ROUTINE
10:22 UTC
DSC CALL
INDIVIDUAL
>LAST CALL
GROUP
BOBBY D
INDIVIDUAL
ROUTINE
>SET CHANNEL
RCV: INDIV
523456789
ROUTINE
ENT –> ACK
13 CHANNEL
REQUEST
ESC –> EXIT