Filter
Top Products
Lowrance - LVR-250 Installation and Operation Instructions 25
Select GPS/DATA, then SETTING.1.
Select TIME FORMAT.2.
Select 12 Hr or 24 Hr as desired. In this example, 12 hour format has been selected and 3.
so the LCD shows the AM or PM suffix.
2-5-4 Time Display Options (TIME DISPLAY)
If you have entered the time manually as described in the previous sections, the time is
always shown on the screen with the prefix M.
However, if the vessel position is being updated through a GPS navigation receiver, you can
switch the time display on the screen ON or OFF as follows:
Select GPS/DATA, then SETTING.
1.
Select TIME DISPLAY.2.
Select ON (on) or OFF (off) as 3.
desired. In this example, OFF has
been selected and so the screen no
longer shows the time.
If the time display is set ON, course and speed data are not displayed on the LCD (see section 2-5-6).
2-5-5 Position Display Options (LL display)
If you have entered the vessel position manually as described in the previous section, the
vessel position is always shown on the screen with the suffix M.
However, if the time is being updated through a GPS navigation receiver, you can switch the
vessel position display on the screen on or off as follows:
Select GPS/DATA, then SETTING.
1.
Select LL DISPLAY.2.
Select ON (on) or OFF (off) as 3.
desired. In this example, OFF has
been selected and the screen no
longer shows the vessel position.
2-5-6 Course & Speed Display Options (COG/SOG)
Use this option to display course over ground (COG) and speed over ground (SOG) data on
the screen.
Select GPS/DATA, then SETTING.
1.
Select COG/SOG.2.
Select ON (on) or OFF (off) as 3.
desired. In this example, ON has
been selected and so the screen
shows the bearing and speed.
If COG/SOG is set ON (on), the time is not displayed on the screen (see section 2-5-4).
SETTING
TIME OFFSET
TIME FORMAT
>TIME DISPLY
TIME DISPLY
ON
>OFF
SETTING
TIME FORMAT
TIME DISPLY
>LL DISPLAY
LL DISPLAY
ON
>OFF
SETTING
TIME DISPLY
LL DISPLY
>COG/SOG
COG/SOG
>ON
OFF