Lowrance - LVR-250 Installation and Operation Instructions34
4-6 DSC functionality options (DSC FUNC)
DSC functionality can be disabled but this is not recommended.
Select DSC SETUP, then DSC FUNC.1.
Press ENT to select ON and to operate the DSC functionality. This will automatically disable ATIS 2.
functionally. The DSC annunciator appears on the screen.
It is not possible to have both ATIS ON (on) and DSC ON (on) simultaneously. When you en-
able one, the other will turn OFF (off). If DSC and ATIS are both OFF (off), DSC will have to be
switched ON (on) for normal DSC operation.
There are two annunciators in the screen to show you the current mode: if the DSC annuncia-
tor is shown, DSC is operational, if the ATIS annunciator is shown, ATIS is operational.
4-7 Response Type to LL Polling Calls (LL REPLY)
You can set up the radio to respond to an LL polling request in one of three ways:
AUTO
Automatically replies to any incoming LL polling requests from any of your
buddies.
MANUAL
Choose whether to reply automatically or manually to any incoming buddy
polling requests.
OFF
Ignores all incoming buddy LL polling requests.
Select DSC SETUP, then LL REPLY.1.
Select your response and press ENT to confirm and return to the menu.2.
LL REPLY
>AUTO
MANUAL
OFF
DSC SETUP
INDIV REPLY
DSC FUNC
>LL REPLY
DSC SETUP
GROUP SETUP
INDIV REPLY
>DSC FUNC
DSC FUNC
>ON
OFF