Filter
Top Products
Lowrance - LVR-250 Installation and Operation Instructions30
Section 4 - DSC Setup Menu (DSC SETUP)
4-1 DSC Setup - Menu Options
The following options are available through MENU key:
Sections 1-3 and 1-4 explain how to navigate around the menu and enter, save and change
data.
4-2 Enter Your USER MMSI (USER MMSI)
This is a once-only operation. You must enter your user MMSI before you can access the DSC
functions.
You can display and read your user MMSI at any time, but you get only one opportunity to
enter your user MMSI.
Select DSC SETUP, then USER MMSI.
1.
If this is the 2. rst time that you are entering your user MMSI, a dashed line appears.
Enter your user MMSI along the dashed line. Press ENT to confirm each correct entry
and to move to the next digit. If you make an error, press - until < appears, then press
ENT to backup and correct the entry.
WARNING
A valid USER MMSI must be entered into this radio before these DSC functions can be
used. See below for instruction to Enter Your USER MMSI.
Enter your user MMSI. See section 4-2. (If you do not have a user MMSI,
see Appendix D.)
Enter or change the name and/or details of a group.
See section 4-3.
Select the type of response to an LL polling request.
See section 4-7.
Turn the DSC operation ON/OFF (on/off).
See section 4-6.
Choose an automatic or manual response to calls. (LVR-250 US only)
See section 4-4.
Enable/disable the ATIS function (LVR-250 EU only)
See section 4-5.
Enter or change your ATIS MMSI (LVR-250 EU only)
See section 4-5.
USER MMSI
GROUP SETUP
INDIV REPLY
ATIS MMSI
ATIS FUNC
DSC FUNC
LL REPLY
DSC SETUP
>USER MMSI
GROUP SETUP
INDIV REPLY
USER MMSI
INPUT AGAIN
–––––––––
INPUT USER MMSI
–––––––––
USER MMSI
187654321
>STORE
CANCEL