Filter
Top Products
Lowrance - LVR-250 Installation and Operation Instructions 39
5-2-8 Call using the Distress Log (DIST LOG)
The Distress Log contains the Distress Log data for the 10 most recent relayed Distress Calls,
so that you can call any of them quickly. Always try to make voice contact on CH16 first, as
follows:
Press CALL to enter DSC mode, then select DIST LOG.
1.
The most recently received Distress Call Is the first entry (01) in the Distress Log. Select 2.
the entry that you want to call and press ENT.
The details are displayed over two screens that alternate every 1.5 seconds; the first
screen shows the location and name or MMSI of the vessel in Distress, the second
screen shows the nature of the emergency (if specified) and the MMSI of the vessel that
relayed the Distress Call.
Select CALL BACK and press ENT, then set the channel and continue as explained in
3.
Section 5-2-1.
5-2-9 Call distress relay using the Distress Log (DIST LOG)
5-2-9-1 Call distress relay to individual using the Distress Log
You can make a distress relay to an individual in the log.
Press CALL to enter DSC mode, then select DIST LOG.
1.
Select the entry that you want to call and press ENT. The details are displayed over two 2.
screens that alternate every 1.5 seconds; the first screen shows the location and name
or MMSI of the vessel in Distress, the second screen shows the nature of the emergency
(if specified) and the MMSI of the vessel that relayed the Distress Call.
Alternating
Alternating
DSC CALL
ALL SHIPS
CALL LOG
>DIST LOG
REBECCA T
>CALL BACK
DELETE
RELAY
02 REBECCA T
DISTRESS
PIRACY
ALL RELAY
DISTRESS
12:15 UTC
82º50.1234 N
24º45.3425 W
REBECCA T
INDIVIDUAL
ROUTINE
>SET CHANNEL
REBECCA T
INDIVIDUAL
ROUTINE
>SEND?
DSC CALL
ALL SHIPS
CALL LOG
>DIST LOG
SAM
>CALL BACK
DELETE
RELAY
DISTRESS
12:05 UTC
82º50.003 N
27º45.543 W
RELAY
>INDIV RELAY
ALL RELAY
INDIV RELAY
>MANUAL NEW
SAM
BOBY
02 SAM
DISTRESS
FLOODING