Lowrance - LVR-250 Installation and Operation Instructions42
The caller should respond to your acknowledgement by making voice contact on the 3.
designated channel. If this does not happen, you can press PTT to initiate voice contact
instead.
The call data is stored in the Call Log (see Section 5-2-7).
5-3-3 Receiving a Group Call (GROUP)
When you receive notification of a GROUP call, press any key 1.
to cancel the alert. The radio automatically selects the channel
designated in the incoming call.
The priority level is always routine, and the group is identified
on the screen. The group will be one of the three groups of
frequently called people that you set up earlier (see Section 4-3).
You do not need to send an acknowledgement. If desired, press PTT to initiate voice
2.
contact on the designated channel.
The call data is stored in the Call Log (see Section 5-2-7).
5-3-4 Receiving a Geographic Call (GEOGRAPH)
A geographic call is received by vessels within a specific geographic boundary area.
When you receive notification of a GEOGRAPH call, press any key to cancel the alert. The
1.
radio manually selects the channel designated in the incoming call. Press ENT.
The user MMSI or name are displayed on the screen. If the radio recognises the user
MMSI as one of your buddies, the buddy’s name is displayed in place of the user MMSI.
Monitor the working channel for an announcement from the calling vessel.
2.
5-3-5 Receiving a Polled Position Call (POSITION)
When you receive GPS position data from a buddy in response to your LL request 1. (see
Section 5-2-9), you are recommended to make a written note of the position, especially
if it is a good fishing position. If enhanced LL position information is available from your
buddy, this is shown on the screen until the screen display changes.
Alternating
Alternating
RCV: GROUP
GP: RD GROUP
FISHER2
ESC –> EXIT
GEOGRAPHICAL
ROUTINE
SAM
ACCEPT –> ENT
14 CHANNEL
REQUEST
ESC –> EXIT
POSITION ACK
SAM
ESC –> EXIT
POSITION ACK
12:15 UTC
82º50. 1234 N
24º45.3425 W