Logitech DLA2RF Speaker System User Manual


 
© 2007 • All rights reserved. 21
DLA2RF 2 Room Speaker Selector
RF Control
Symptom Possible Cause Solution
No control of DLA2RF
from RF Remote
1. Wiring: Signals from
RF Receiver Base not
reaching DLA2RF
Check RF Receiver Base
connection to DLA2RF
and verify connectivity.
Check Room 1 indica-
tor on front of DLA2RF
by sending a command
from the RF remote. If
the indicator LED fl ashes
red, the RF signal is be-
ing received.
2. Remote Control bat-
teries are dead
Replace batteries
Intermittent control of
DLA2RF from RF Remote
1. Position of Receiver
base not optimal
Move Receiver base to
nd optimum placement
2. Radio Frequency de-
vices operating nearby in
same frequency band
Check for other devices
in the home or neigh-
boring dwellings and
relocate if possible