Filter
Top Products
16 ©2007 • All rights reserved.
DLA2RF 2 Room Speaker Selector
ALL ON/OFF
Press the ALL ON/OFF Button to turn the speakers in both Room 1 and Room 2 ON or OFF.
ROOM 1
ROOM 2
Press
Default Volume
In order to guard against unexpected high volume levels when the system is turned on, a De-
fault Volume Level may be set for each room. If the volume level prior to turning the room Off is
lower or equal to the default volume level, the room will come back on at the last volume. If the
volume level prior to turning the room Off is higher than the default volume level, the room will
come back on at the default volume instead of the last volume.
To set the Default Volume Levels for a Room:
Press the Room Button for the desired room.
Press
ROOM 1
ROOM 2
Set the desired Default Volume Level using the front panel Vol + and
Vol - Buttons.
Press and hold the Room Button on the front panel (Room LED will turn off and all
Volume LED’s will go off).
Without releasing the Room button, press and hold the Vol - Button.
1.
2.
3.
4.