Filter
Top Products
12 ©2007 • All rights reserved.
DLA2RF 2 Room Speaker Selector
Important Note:
Speaker Impedance must match receiver/amplifi er impedance rating! If the
receiver/amplifi er is rated at 8 Ohms minimum impedance, 8 Ohm speakers
must be used. If the receiver/amplifi er is rated at 4 Ohms minimum impedance,
4 Ohm speakers may be used. DO NOT use speakers rated BELOW 8 Ohms
with an amplifi er rated at 8 Ohms minimum impedance! It is permissable to
use higher rated speakers with a lower impedance-rated amplifi er (Example: 8
Ohm speakers may be used with a receiver/amplifi er that is rated at 4 Ohms
minimum impedance).
SPEAKER OUTPUTS
Follow the procedures outlined in the previous section to connect the Speaker Outputs to the
Room 1 and Room 2 speakers. Make sure to match the impedance of the speakers and ampli-
fi ers as noted.
1
Room 1
Room 2
DLA2RF
Speaker
Cables
Speaker
Cables
Figure 3-2: DLA2RF Speaker Outputs to Room Speakers
IR EMITTER OUTPUTS
These outputs are reserved for future use.