Filter
Top Products
MT2000-0200-1 Rev f (10-2007)
DCN0160 35
9.10 APPENDIX J: Warranty Statement
5 YEAR WARRANTY FOR:
KM26 Magnetic Liquid Level Gauges; MagWave Dual Chamber System; LS Series Mechanical Level Switches
(LS500, LS550, LS600, LS700, LS800 & LS900); EC External Chambers, STW Stilling Wells and ST95 Seal Pots.
3 YEAR WARRANTY FOR:
KCAP300 & KCAP400 capacitance switches. BETA Pressure and Temperature Switches have a limited factory
guarantee, excluding wetted parts & consumables.
2 YEAR WARRANTY FOR:
AT100, AT100S and AT200 series transmitters; RS80 and RS85 liquid vibrating fork switches; RLT100 and RLT200
reed switch level transmitters; TX, TS, TQ, IX and IM thermal dispersion switches; IR10 and PP10 External Relays;
MT2000, MT5000, MT5100 and MT5200 radar level transmitters; RI100 Repeat Indicators; KP paddle switches;
A02, A75 & A77 RF capacitance level switches and A38 RF capacitance level transmitters; Buoyancy Level
Switches (MS50, MS10, MS8D & MS8F); Magnetic Level Switches (MS30, MS40, MS41, PS35 & PS45).
1 YEAR WARRANTY FOR:
KM50 gauging device; AT500 and AT600 series transmitters; LaserMeter and SureShot series laser transmitters;
LPM200 digital indicator; DPM100 digital indicators; APM100 analog indicators; KVIEW series digital indicators and
controllers; SF50 and SF60 vibrating fork switches, KB Electro-Mechanical Continuous Measuring Devices, KSONIK
ultrasonic level switches, transmitters & transducers, ChuteMaster Microwave Transmitter / Receiver and TiltMaster
Switches.
SPECIAL WARRANTY CONSIDERATIONS:
K-TEK does not honor OEM warranties for items not manufactured by K-TEK (i.e. Palm Pilots). These claims should
be handled directly with the OEM.
K-TEK will repair or replace, at K-TEK’s election, defective items which are returned to K-TEK by the original pur-
chaser within the period specified above from the shipment date of the item and which is found, upon examination
by K-TEK, to its satisfaction, to contain defects in materials or workmanship which arose only under normal use and
service and which were not the result of either alterations, misuse, abuse, improper or inadequate adjustments, ap-
plications or servicing of the product. K-TEK’s warranty does not include onsite repair or services. Field ser-
vice rates can be supplied on request.
If a product is believed to be defective, the original purchaser shall notify K-TEK and request a Returned Material
Authorization before returning the material to K-TEK, with transportation prepaid by the purchaser. (To expedite all
returns/repairs from outside of the United States, consult K-TEK’s customer service team (service@ktekcorp.com) to
determine an optimal solution for shipping method and turnaround time.) The product, with repaired or replaced
parts, shall be returned to the purchaser at any point in the world with transportation prepaid by K-TEK for best-way
transportation only. K-TEK is not responsible for expedited shipping charges. If the product is shipped to K-TEK
freight collect, then it will be returned to the customer freight collect.
If inspection by K-TEK does not disclose any defects in material or workmanship, K-TEK’s normal charges for repair
and shipment shall apply (minimum 250.00 USD).
The materials of construction for all K-TEK products are clearly specified and it is the responsibility of the purchaser
to determine the compatibility of the materials for the application.
THE FOREGOING WARRANTY IS K-TEK'S SOLE WARRANTY AND ALL OTHER WARRANTIES EXPRESSED,
IMPLIED, OR STATUTORY, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OF FITNESS FOR
A PARTICULAR PURPOSE, ARE EXCLUDED AND NEGATED TO THE MAXIMUM EXTENT PERMITTED BY
LAW. NO PERSON OR REPRESENTATIVE IS AUTHORIZED TO EXTEND ANY OTHER WARRANTY OR CRE-
ATE FOR K-TEK ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF K-TEK’S PRODUCTS. THE
REMEDIES SET FORTH IN THIS WARRANTY ARE EXCLUSIVE OF ALL OTHER REMEDIES AGAINST K-TEK. K
-TEK SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, OR SPECIAL DAMAGES OF ANY
KIND. K-TEK’S SOLE OBLIGATION SHALL BE TO REPAIR OR REPLACE PARTS (FOUND TO BE DEFECTIVE
IN MATERIALS OR WORKMANSHIP) WHICH ARE RETURNED BY THE PURCHASER TO K-TEK.