Filter
Top Products
PLACEMENT
PLACEMENT
Before you install the REFERENCE 64 into your system, we
recommend that you follow these guidelines in choosing the
location. This will facilitate a clean, trouble-free installation.
1. Although well shielded, the Processor should not be placed in
close proximity to hum-sensitive components (ioe. preamps,
turntables, tuners, etc.) that can create interference and induce
hum.
2. As with any high quality component, ensure that the vent
openings in the chassis are free from obstruction, allowing the
Processor to dissipate heat created by its Power Supply and Class
A output stage. Place the unit on a clean, level surface away from
excessive dirt or moisture. Make sure the REFERENCE 64 has at
least 2 inches of clearance on either side and 2-3 inches of space
at the top. Components that are heat sensitive should not sit
directly above the unit.
3. The REFERENCE 64 does not require additional mass coupling
or isolation. You may experiment with feet or cones as long as they
do not permanently affix to the chassis. Any unauthorized
modifications to the electronics or chassis will void the warranty.
PAGE 8