Filter
Top Products
CONNECTIONS
INPUT AND OUTPUT CONNECTIONS
CAUTION: When making connections to this component or any
other, make sure the power amplifier is OFF and the preamplifier
is in the MUTE or STANDBY mode.
1. Connect the AC Mains cord to the back of the REFERENCE 64
Power Supply and plug the power cord into th AC Mains.
CAUTION: Only plug the Power Supply into the AC Mains after the
power coupler joining the processor and Power Supply has been
installed and secured.
NOTE: Once the unit has been connected to the AC Mains, the
following LEDs on the front panels should be checked for illu-
mination.
On the Power Supply:
Analog Power
Digital Power
On the Processor:
DAC Power
Digital Power
0 Degree
Source
NOTE: Frequency LEDs will not be lit unless an active source is
connected and selected.
PAGE 10