Filter
Top Products
CONNECTIONS
2. Connect the REFERENCE 64 analog output to the line level
input of your preamplifier.
The REFERENCE 64 is equipped with two analog output configu-
rations" Single-ended via RCA connectors and Balanced via XLR
connectors. If your preamplifier has high level balanced inputs,
we recommend the balanced outputs of the Processor be used.
There are considerable sonic benefits associated with the use of
balanced interconnection.
The XLR pin configuration is described below,
Pin 1
Pin 2
Pin 3
Ground
Non-inverting (0
°)
Inverting ( 180
°)
NOTE: The two outputs can be used to
different systems.
simultaneously feed
NOTE: If you decide to use the single-ended analog outputs, the
type of interconnect cable should be chosen carefully. High
quality shielded cable is suggested.
PAGE 11