Filter
Top Products
CONNECTIONS
’"’ ’" ,’
TIMESYNC
TimeSync is a proprietary interlink system that enables a Krell
CD transport and REFERENCE 64 to link and run on the CD
transport clock. The TimeSync system can only be had on specific
Krell transports. The DT- 10 and MD- 10 CD Transports come
standard with the TimeSync output. The MD-20 can have the
TimeSync installed as a new or additional purchase option.
The TimeSync input allows the clock of selected Krell transports
to become the system clock. The jitter normally induced into the
system, due to the recovery module that separates the data and
the clock, is eliminated. The recovered clock is ignored and the
clock in the transport will be the clock used in the Processor.
The use of the TIMESYNC input requires that the CD transport
used be a Krell equipped with the TimeSync/Special AT&T/ST
output transmitter. It also requires that the TimeSync output of
the CD Transport be connected to the TimeSync input of the
REFERENCE 64 processor using an AT&T/ST optics cable. The
TimeSync is in addition to the connections used to carry CD disc
data. The CD data can be carried via any other of the outputs,
coax, balanced XLR, or AT&T optics.
PAGE 16