Filter
Top Products
42
Mute
This function enables you to control the mute mode. The options are: FULL, -20 dB,
BACK.
Enter the menu, then:
1. Use the level control knob on the preamplifier chassis front panel or up and
down keys (16) on the remote control to select:
MUTE.
2. Press the enter button on the preamplifier chassis front panel or the or enter
key (18) on the remote control
. The front panel display (15) shows the default
mode:
FULL.
3. Use the level control knob or the up and down keys to select the desired
option:
FULL or -20 dB.
4. Press the enter button or key to confirm the selection. The front panel display
reads:
MUTE.
FULL
The output of the Evolution Two is completely silenced.
-20dB
The output of the Evolution Two is reduced by 20 dB and may still be audible.
Output Trigger
This function enables you to turn the two output triggers on or off, or configure
them with independent delays of up to 20 seconds. The options are:
ON, OFF, DELAY.
Enter the menu, then:
1. Use the level control knob on the preamplifier chassis front panel or up and
down keys (16) on the remote control to select:
OUTPUT TRIGGER.
2. Press the enter button on the preamplifier chassis front panel or the enter key
(18) on the remote control
. The front panel display (15) shows the default
mode:
TRIGGER 1.
3. Pr
ess the enter button or key again. The front panel display shows the default
mode:
OFF.
4. Use the level control knob or up and down keys to select: OFF, ON, or DELAY.
5. Select DELA
Y
.
Y
ou ar
e pr
ompted to enter a delay time of 0-20 seconds.
6. Enter the delay time.
7. Press enter to confirm the selection. The front panel display reads: DELAY.
17 Menu Button or Key
Enter or exit the menu.
16 Volume Knob
or Level Keys
Navigate the menu hierarchy,
review functions and configu-
ration options.
18
Enter Button or Key
Select a configuration option
or confirm a selection.
BACK
Scroll up the menu hierarchy,
or exit a menu option without
confirming it.
(SECTION SEVEN: Customizing the Evolution Two continued)