Filter
Top Products
Evolution Two Monaural Preamplifier
Owner’s Reference, v05.0
Krell Industries, Inc.
45 Connair Road
Orange, CT 06477-3650 USA
TEL 203-799-9954
FAX 203-891-2028
E-MAIL Krell@krellonline.com
WEBSITE http://www.krellonline.com
This product complies with the EMC directive (89/336/EEC) and the low-voltage directive
(73/23/EEC).
WARNINGS
The Evolution Two preamplifier must be placed on a firm, level surface where it is not exposed to
dripping or splashing.
The ventilation grids on the top of the Evolution Two preamplifier and the space underneath the
Evolution Two preamplifier must be unobstructed at all times during operation. Do not place flam-
mable material above or beneath the preamplifier.
Befor
e making connections to the Evolution Two preamplifier, ensure that the power is off and other
components ar
e in mute or stand-by mode. Make sure all cable terminations are of the highest quali-
ty, free from frayed ends, short circuits, or cold solder joints.
Do not connect an RS-232 cable to the phono power port. Output from the phono power port can
seriously damage your computer. Do not connect the cable from a Krell KPE phono stage to the
RS-232 por
t.
THERE ARE NO USER SER
VICEABLE P
AR
TS INSIDE AN EVOLUTION TWO MONAURAL
PREAMPLIFIER.
Please contact Krell if you have questions not addressed in this guide.
This pr
oduct is manufactur
ed in the United States of America. Kr
ell
®
is a r
egister
ed trademark of Kr
ell Industries, Inc., and is r
estricted for use
by Krell Industries, Inc., its subsidiaries, and authorized agents. Evolution Bias
™ is a trademark of Krell Industries, Inc. and is a Krell technology
based on U.S. Patent No. 5,331,291. CAN Link
™, CAST™, Evolution CAST™, and Kr
ell Cur
rent Mode
™ ar
e trademarks of Kr
ell Industries,
Inc. All other trademarks ar
e r
egister
ed to their r
espective companies.
© 2005 by Kr
ell Industries, Inc. All rights r
eserved P/N 307773