Filter
Top Products
CLONE BEGIN
Sends the message that a clone is about to begin, from the clone transmitter to
the clone receiver(s).
CLONE TRANSMIT
Once the clone begin message is sent, the clone transmitter display reads: CLONE
TRANSMIT, indicating that the preamplifier is ready to transmit the clone data.
CLONE RECEIVE
Once the clone begin message is sent, the clone receiver(s) display reads: CLONE
RECEIVE, indicating that the preamplifier(s) is(are) ready to receive the clone data.
Note
In order to set a clone receiver to ignore the clone, use the level control knob on the clone
receiver front panel to scroll to
CLONE IGNORE.
Display
This function enables you to turn on the front panel display (15) all the time, or
turn it off after a time out. The options are:
ON, TIMED.
Enter the menu, then:
1. Use the level control knob on the preamplifier chassis front panel or the up and
down keys on the remote control (16) to select:
DISPLAY.
2. Press the enter button on the preamplifier chassis front panel or the enter key
(18) on the remote control
. The front panel display (15) reads: MODE.
3. Press the enter button or key (18) again. The front panel display shows the
default mode:
ON.
4. Use the level contr
ol knob or the up and down keys to select the desired
option:
ON or TIMED.
5. Pr
ess the enter button or key
to confir
m the selection. The fr
ont panel display
r
eads:
MODE.
6. Use the level control knob or the up and down keys to select: BRIGHTNESS.
7. Press the enter button or key. The front panel display shows the default mode:
HIGH.
8. Use the level control knob or the up and down keys to select the desired
brightness:
OFF, LOW (25%), MED (50%), or HIGH (100%).
9. Press the enter button or key to confirm the selection. The front panel display
reads:
BRIGHTNESS.
36
(SECTION SEVEN: Customizing the Evolution Two continued)
17 Menu Button or Key
Enter or exit the menu.
16 Volume Knob
or Level Keys
Navigate the menu hierarchy,
review functions and configu-
ration options.
18
Enter Button or Key
Select a configuration option
or confirm a selection.
BACK
Scroll up the menu hierarchy,
or exit a menu option without
confirming it.