Filter
Top Products
20
Remote Control Description
See Figure 2 on page 16
The Evolution Two Monaural Preamplifier remote provides all of the power, pream-
plifier, level control, and navigate/customize functions outlined under
Front Panel
Description,
pages 17-19. The remote control provides additional functions,
including CD functions and menu configuration, accessed using only the remote
control keys.
Battery Installation and Removal
The Evolution Two preamplifier remote control uses 2 AAA-size 1.5 Volt batteries.
Batteries are included with the shipment. To install the batteries:
1. Remove the remote control backplate, using the supplied T-10 Torx wrench.
2. Install the batteries, following the battery position diagram on the plastic bat-
tery receptacle.
3. Replace and secure the backplate.
Notes
Replace batteries when remote control function becomes intermittent.
Remove batteries if the remote control is not used for a long period of time. Battery leakage
can damage the remote control.
Preamplifier Functions
21 Main Bus Key
Use this key to select the input for the main bus output. The r
ed main LED illu-
minates, when this function is selected.
For more information, see Play and
Record
, on page 30.
Level Control
22
Bal(ance Key)
Use this key, along with level keys or the level control knob (16) on the pream-
plifier chassis to balance left and right output levels. The fr
ont panel display
(15) shows the left and right balance offset.
(
SECTION FOUR: Anatomy of an Evolution Two continued)