Filter
Top Products
12
Order / total number in folder
This shows the order of the projects/files within the specified folder, as well as the total number of
projects/files in that folder.
Project/file format
This shows the format of the selected project/file (→p.28).
Record/edit calendar indicator
This shows the date and time at which the selected project/file was recorded or most recently edited
(→p.18).
Protect indicator
A lock symbol is shown if the selected project is protected. Nothing is shown if the protect setting is off
(→p.20).
Counter
The counter shows either the current location (as elapsed time since the beginning of the recording), or
the remaining amount of time that can be recorded (→p.17).
Project/file playback location indicator
This is a graphical indication of the approximate position of the current counter value compared to the
overall length of the current project/file.
6. Recording
If you set the MR-2000S's date and time (→p.17), the correct date and time will automatically be
assigned to each project and date folder. However if you leave the power cable disconnected, the inter-
nal clock will stop operating after approximately one week. If you've left the power cable disconnected
for an extended period of time, you should set the date and time again after reconnecting the power
cable.
For convenient management of projects, the MR-2000S automatically creates a date folder for each day that
you record. Each time you record, a folder called a "project" will be created, containing an audio file and
another file containing the settings for that audio file. A name will be automatically assigned to the project
folder (→p.34).
You are free to edit this name after recording (→p.19).
On the MR-2000S, each of these project folders is handled in the same way as an audio file.
MR PROJECT (Folder)
2008-08-20 (Folder)
2008-08-19 (Folder)
2008-07-25 (Folder)
DFF-0001 (Project folder)
DFF-0002 (Project folder)
WAV-0001 (Project folder)
WAV-0002 (Project folder)
Automatically created
each day you record