Filter
Top Products
14
4. Appendices
PEDAL (Pedal effect)
Knob 1 Knob
2
Knob 3 Knob
4
Knob 5 Pedal
TYPE DEPTH/PITCH
MIX/LEVEL
VOLUME — 0...10.0 Volume
CHO1 0...10.0 —
Depth
CHO2 0...10.0 — Speed
VIBRATE 0...10.0 — Speed
FLANGER 0...10.0 — Modulation
PHASER 0...10.0 — Speed
TREMOLO 0...10.0 — Speed
PAN 0...10.0 — Speed
WAH ——Peak Fre.
FILTER 0...10.0 — Peak Fre.
RING 0...10.0 — Pitch
PITCH -24...24 [
CENT
] 0...10.0 Pitch
F BACK1 0...10.0 — Level+Reverb
F BACK2 0...10.0 — Level+Reverb
DELAY 10[
ms
]...2[
SEC
] 0...10.0 Effect level
ECHO 10[
ms
]...2[
SEC
] 0...10.0 Delay time
ROOM — 0...10.0 Reverb level
GARAGE — 0...10.0 Reverb level
HALL — 0...10.0 Reverb level
SAMPLE1 S/L — Playback
SAMPLE2 S/L — Play/reverse
LOOP1 S/L — Volume
LOOP2 S/L — Loop time
These effect models let you use the expression pedal to control the
effect in realtime. The following parameters are assigned to each
knob.
Knob 1 TYPE Select the effect type
Knob 3
DEPTH/PITCH
Adjusts the depth/Adjusts the pitch
Knob 5 MIX/LEVEL Adjusts the mix balance between the
effect sound and original sound/
Adjusts the level
CHO1—PITCH cannot be used simultaneously with the Modu-
lation effect. If you use this effect in a program where the Modu-
lation effect is turned on, the Modulation effect will automati-
cally be turned off.
F BACK 1 and 2 cannot be used simultaneously with the
ROOM1—ARENA Ambience effects. If you use these effects in
a program where ROOM1—ARENA are turned on, the
ROOM1—ARENA effect will be turned off automatically.
DELAY—HALL cannot be used simultaneously with the Ambi-
ence effect. If you use this effect in a program where the Ambi-
ence effect is turned on, the Ambience effect will automatically
be turned off.
SAMPLE1—LOOP2 cannot be used simultaneously with a
Modulation effect or Ambience effect. If you use the SAMPLE1—
LOOP2 effects in a program where a Modulation effect or Am-
bience effect are turned on, that effect will be turned off auto-
matically.
VOLUME (Volume)
This is a volume pedal. Value knob 5 sets the minimum level.
CHO1 (Chorus1)
This is a chorus effect in which the pedal controls the depth of
the pitch modulation.
CHO2 (Chorus2)
This is a chorus effect in which the pedal controls the speed of
the pitch modulation.
VIBRATO (Vibrato)
This is a vibrato effect in which the pedal controls the speed of
the pitch modulation.
FLANGER (Flanger)
This is a flanger in which the pedal controls the bandwidth
(modulation) of the effect.
PHASER (Phaser)
This is a phaser in which the pedal controls the speed of the phase
modulation.
TREMOLO (Tremolo)
This is a tremolo effect in which the pedal controls the speed of
the volume change.
PAN (Panpot)
This is a pan effect in which the pedal controls the speed at which
the position of the sound will change when stereo playback is
used.
WAH (Wah)
This is a wah in which the pedal controls the peak frequency.
FILTER (Resonance Filter)
This is a resonance filter in which the pedal controls the peak
frequency of the filter.
RING (Ring Modulator)
This effect creates a bell-like sound in which the pedal controls
the pitch. To obtain the cleanest effect, use the pickup closes to
the neck, turn down the tone of your guitar, and play near the
12th fret.
PITCH (pitch shifter)
The pedal will control the amount of pitch shift. When value
knob 5 is at "0" only the original sound will be heard. At "5" the
original sound and effect sound will be mixed equally, and at
"10" only the effect sound will be heard.
Feed Back
In this effect, the pedal controls the vibrato that is applied to the
feedback sound.
While sustaining a note on your guitar, advance the pedal to pro-
duce a feedback sound. The feedback sound will disappear when
you return the pedal. Value knob 3 adjusts the speed of the vi-
brato.
There will be no feedback effect if OFF, ACOUSTIC, or CLAS-
SIC COMP is selected for the Drive Amp effect.
F BACK1 (Feed Back1)
A feedback sound will be generated to the pitch of your play-
ing.
F BACK2 (Feed Back2)
A feedback sound will be generated one octave above your
playing.
DELAY (Delay)
In this effect, you can use the pedal to control the input level of
the delay.
By pressing the TAP switch two times, you can set the TIME of
knob 2 to the corresponding tempo.
ECHO (Echo)
This is a echo in which the pedal controls the delay time. As on a
tape echo unit, changing the delay time will also change the pitch.
Value knob 3 adjusts the maximum delay time.