Kenwood TS-570D Stereo System User Manual


 
39
MEMORY FEATURES
MICROPROCESSOR MEMORY BACKUP
This transceiver uses a lithium battery to retain the user-
specified memory items. Switching OFF the power will
not erase the Menu setups or memory channels. The
lithium battery life is approximately 5 years.
If you find the transceiver powers-up with default
settings, and VFO and memory channel data is lost,
have the lithium battery replaced. Contact an authorized
KENWOOD service facility or dealer.
CONVENTIONAL MEMORY
Conventional memory is used for storing data that you
want to recall many times in the future. For example,
you may store the frequency where you regularly meet
your club members.
This transceiver provides 100 Conventional memory
channels, in total, numbered 00 to 99. Channels 90 to
99 are designed for programming VFO tuning ranges
and scan ranges. The data that you can store is listed
below:
STORING DATA IN MEMORY
There are 2 methods for storing transmit/receive
frequencies and associated data in memory channels
00 to 89. Use either method depending on the
relationship of the receive and transmit frequencies that
you store:
Simplex channels:
RX frequency = TX frequency
Split-frequency channels:
RX frequency TX frequency
Memory channels 90 to 99 can also be used as simplex
channels.
Note:
When RIT or XIT is ON, the frequency that includes the RIT
or XIT offset will be stored.
Simplex Channels
1 Press [A/B] to select VFO A or VFO B.
•“t A” or “t B” appears to show which VFO is
selected.
2 Select the frequency, mode, etc. to be stored.
3 Press [M.IN] to enter Memory Scroll mode.
•To exit Memory Scroll mode and abort the
storage process, press [CLR].
4 Turn the MULTI/CH control, or press Mic [UP] or
[DWN] to select a memory channel.
Entering a 2-digit number such as 05 using
the numeric keys can also be used to select a
channel.
5 Press [M.IN] again to store the data.
The previous data stored in the channel is
overwritten.
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Parameter
Channel
90 ~ 99
Channel
00 ~ 89
RX frequency
TX frequency
Mode for RX
Mode for TX
Start/end frequencies
Subtone frequency
Tone ON/OFF
CTCSS ON/OFF
Memory Channel Lockout
ON/OFF
Yes
(simplex)
Yes
(simplex)
Yes
Yes
Yes
Yes
Yes
1
1
1
1
1
Changing the data after recalling a memory channel
overwrites the contents of the channel.