Filter
Top Products
APRS-5
This transceiver is capable of displaying the following icons as
station IDs.
<APRS>
<NAVITRA>
Some icons may appear with overlay characters as below if the
received icon data includes them (APRS only).
Example:
The following icons show the directions of stations relative to
your position.
(North Up)
(Heading Up: example)
• When pressing [F], [N/H] while the target point is displayed, the
North Up display(displays North as the top) changes to the Heading
Up display (displays the current travel direction as the top) or vice-
versa. In the Heading Up display, a “+” or “-” is used to help indicate
the target direction.
To change the speed/distance and/or temperature settings of the
units, access Menu 626 (DISPLAY UNIT 1 - SPEED, DISTANCE)
and/or Menu 626 (DISPLAY UNIT 1 -TEMPERATURE)
Note: Some stations transmit APRS packets through TNCs connected to GPS
receivers. If you receive packets from those stations, “GOOD” (satellites tracked)
or “LAST” (satellites not tracked) will be shown as the situation, with GLL, GGA,
or RMC which designates $GPGLL, $GPGGA, or $GPRMC format.
SORT FUNCTION
This function allows you to sort the station list according to the
callsign, date time, or distance.
1 Display the station list.
2 Press [SORT].
• The sort type list appears on the display.
3 Select a sort type.
4 Press the Tuning control.
• “SORTING” appears on the display and sorting begins.
CALLSIGN
All callsigns are compared and arranged
in ascending order.
DATE/TIME
All received dates and times are
compared and arranged in descending
order, with the last received message
listed fi rst.
DISTANCE
The distance between the other station
and My station when selecting the sorting
method is calculated, then compared and
arranged in ascending order, with the
closest station listed fi rst.
5 The newly sorted station list appears on the display.
• After sorting, when new station data is received, it is added to the
station list without resorting.