Filter
Top Products
PACKET-5
Command Name Short Description Parameter Default
LOCATION LOC
If set to EVERY, sends GPS data at intervals of the specifi ed
period (n). If set to AFTER, sends GPS data only once after
the specifi ed period (n). The unit of n is 10 seconds.
EVERY/ AFTER n
(n = 0 ~ 250)
EVERY 0
LOG LOG
Displays the list of stations which have connected to the TNC
mailbox.
−−
LPAT H LPA
Specifi es callsigns to send GPS data. Call1 is the callsign of
the destination. Call2 to call9 are callsigns of stations to be
digipeated through.
Call1 (VIA call2,
call3, ... call9)
GPS
LTEXT LT
Specifi es the content of a message to be included in GPS
data.
0 ~ 159 characters
−
LTMON LTM
Specifi es the interval for displaying a message determined
by LTEXT on the screen; a message appears like a received
beacon packet. The unit of the parameter is 1 second.
0 ~ 250 0
MAIL MAI
When ON and the TNC mailbox holds a message addressed
to you, outputs “Low” to the MAILLED terminal.
ON/ OFF OFF
MAXFRAME MAX
Specifi es the maximum number of packets to be transmitted
at one time.
1 ~ 7 4
MBOD MB When ON, allows the TNC mailbox to be used. ON/ OFF OFF
MCOM MCOM
When ON, causes the TNC to also monitor control packets.
When OFF, causes it to monitor only information packets.
ON/ OFF OFF
MCON MC
When ON, causes the TNC to monitor other stations while in
connection with the target station.
ON/ OFF OFF
MINE MI
Displays the list of messages, in the TNC mailbox,
addressed to you and messages that you sent.
−−
MONITOR M When ON, causes the TNC to monitor packets. ON/ OFF ON
MRPT MR
When ON, causes the TNC to display the entire digipeat list
for monitored packets.
ON/ OFF ON
MSTAMP MS
When ON, causes the TNC to display data and time
information for monitored packets.
ON/ OFF OFF
MYALIAS MYA Specifi es a callsign for using your station as a digipeater.
6 characters +
SSID
−
MYCALL MY Specifi es your callsign.
6 characters +
SSID
−
MYMCALL MYM Specifi es a callsign to be assigned to your TNC mailbox.
6 characters +
SSID
−
NEWMODE NE
When ON, entering a CONNECT command causes the TNC
to immediately enter the other mode.
ON/ OFF OFF
NOMODE NO
When ON, does not cause the TNC to automatically enter
the other mode. When OFF, causes it to automatically enter
the other mode as specifi ed by NEWMODE.
ON/ OFF OFF
NPAT H NPAT H
Specifi es digipeater callsigns to be added when the UISSID
parameter in a received packet is 8 or 12.
Call1, ... call7
−
NTSGRP NTSGRP
Specifi es a group code to be used for making a $PNTS
sentence.
0 ~ 3 characters
−
NTSMRK NTSMRK
Specifi es a mark number to be used for making a $PNTS
sentence.
$00 ~ $14 $00
NTSMSG NTSMSG
Specifi es a message to be used for making a $PNTS
sentence.
0 ~ 20 characters
−
OVERKILL OVE
Specifi es the number of old messages to be deleted when
the TNC mailbox does not accept a new message because
the memory is full.
0 ~ 255 0
PACLEN P
Specifi es the maximum length of the data portion of a
packet.
0 ~ 255 128
PACTIME PACT
If set to EVERY, sends a packet at intervals of the specifi ed
period (n). If set to AFTER, sends a packet only once after
the specifi ed period (n). The unit of n is 100 milliseconds.
EVERY/ AFTER n
(n = 0 ~ 250)
AFTER 10
PERSIST PE
Specifi es a parameter to calculate probability for the
PERSIST/SLOTTIME method.
0 ~ 255 128