Filter
Top Products
51
TROUBLESHOOTING GUIDE
Problem Solution
Cannot turn
the transceiver
power ON.
• The battery pack may be dead.
Recharge or replace the battery pack.
• The battery pack may not be installed
correctly. Remove the battery pack
and install it again.
Battery power
dies shortly after
charging.
• The battery pack life is nished.
Replace the battery pack with a new
one.
Cannot talk to
or hear other
members in your
group.
• Make sure you are using the same
frequency and QT/DQT setting as the
other group members.
• Other group members may be
using Privacy Talk. Turn on your
transceiver’s Privacy Talk.
• Other group members may be too
far away. Make sure you are within
range of the other transceivers.
Other voices
(besides group
members) are
present on the
channel.
• Change the QT/DQT settings. Make
sure all group members change the
settings on their transceivers to match
the new QT/DQT setting.
The transceiver
is malfunctioning
for no apparent
reason.
• Reset the transceiver as described on
page 43