Filter
Top Products
29
■ receiving A SelcAll
When a selcall is received, the icon appears on the
display along with the ID of the caller.
Press the PTT switch and speak into the microphone to
respond to the call, then continue the call as normal. When
the call is nished, press the CAL key to end the call.
■ dAtA trAnSmit modulAtion delAy time
To set up a data transmit modulation delay time:
1 With the transceiver power OFF, press and hold the
MENU key while turning the transceiver power ON (for
1 second).
2 Press the or key to select “dt”.
3 Press the MENU key then press or to select
“dt- 0” (0 ms), “dt- 5” (500 ms), “dt-10” (1000 ms),
“dt-15” (1500 ms), or “dt-20” (2000 ms).
4 Press the MENU key to conrm the selection.
5 Press the PTT, MON, or CAL key to exit Setting Mode.