Filter
Top Products
32
4 Press the MENU key to conrm the selection.
5 Press the PTT, MON, or CAL key to exit Setting Mode.
■ cAller id
If set up by your dealer, when the transceiver receives
a PTT ID signal, the caller ID of that signal appears on
the display, along with the icon, so you know who is
making the call.
To turn Caller ID on or off:
1 With the transceiver power OFF, press and hold the
MENU key while turning the transceiver power ON (for
1 second).
2 Press the or key to select “CI”.
3 Press the MENU key then press or to select
“CI-on” (Caller ID is on) or “CI-oF” (Caller ID is off).
4 Press the MENU key to conrm the selection.
5 Press the PTT, MON, or CAL key to exit Setting Mode.