Filter
Top Products
13
GETTING STARTED
qSwitch the Power ON.
Switch the transceiver power ON by turning
the Power switch/ Volume control clockwise.
• A conrmation tone sounds, the LCD lights up
momentarily, then the current channel number
is displayed.
To switch the transceiver power OFF, turn
the Power switch/ Volume control fully
counterclockwise, until a click sounds.
w Adjust the Volume.
Set your desired volume level by rotating the
Power switch/ Volume control.
• Clockwise increases the volume and
counterclockwise decreases the volume.
Note: To adjust the volume using background noise
as a reference, use the Monitor function {page 19}.
eSelect a Channel.
Select a channel by pressing the or
keys.
• A conrmation tone sounds each time you
press the or key.