Filter
Top Products
15
CHANNEL FREQUENCY SETUP
You can change the default frequency of each channel:
1 With the transceiver power OFF, press and hold the
MENU key (for approximately 1 second) while turning the
transceiver ON.
2 Press the or key to select a channel.
• The current frequency list number appears beside the channel
number.
3 Press the MENU key then press or to select the
frequency list number for the channel.
• Refer to page 49 for the frequencies available for each
channel.
4 Press the MENU key to conrm the selection, then repeat
steps 3 and 4 to set additional channels.
5 Press the PTT, MON, or CAL key to exit Setting Mode.