Filter
Top Products
59
Specifications
Chapter Five : Warnings and Specifications
IR Receiver In
IR Out LCD
Remote
Terminal
To Tip Signal Signal
To Ring Ground
To Sleeve +12V Ground
Video Section
Video Inputs / Outputs
Video (composite) .............................................1 Vp-p / 75 Ω
S Video (luminance signal) ...............................1 Vp-p / 75 Ω
(chrominance signal) .................. 0.286 Vp-p / 75 Ω
Component (luminance signal) .......................1 Vp-p / 75 Ω
(PB/PR-signal) .............................±0.324 Vp-p / 75 Ω
FM Tuner Section
Tuning Frequency Range...........................87.5 MHz ~ 108 MHz
Usable Sensitivity (Mono)
.................... 1.2 µV (75 Ω) / 12.2 dBf (75 kHz dev., sinad 30 dB)
50dB Quieting Sensitivity
Stereo............................................... 22.4 µV (75Ω) / 38.2 dBf
Total Harmonic Distortion (1 kHz)
Mono ................................................... 0.3 % (71.2 dBf input)
Stereo................................................... 0.5 % (71.2 dBf input)
Signal to Noise Ratio (1 kHz, 75 kHz DEV.)
Mono ................................................... 75 dB (71.2 dBf input)
Stereo....................................................70 dB (71.2 dBf input)
Stereo Separation (1 kHz) ................................................. 40 dB
Selectivity (+400 kHz) ....................................................... 70 dB
Frequency Response................30 Hz ~ 15 kHz, +0.5 dB, -3.0 dB
AM Tuner Section
Tuning Frequency Range
10kHz step .............................................530 kHz ~ 1,700 kHz
Usable Sensitivity (30 % mod., S/N 20 dB)
........................................................................... 16 µV / (500 µV/m)
Signal to Noise Ratio (30 % mod. 1 mV input) ............... 50 dB
Relay and IR In/Out Section
Relay Control Terminal
Maximum Output Current ............................................20 mA
Operating Voltage.............................................................. 12 V
Output Impedance ..........................................................470 Ω
IR Receiver In Terminal
Maximum Output Current ............................................20 mA
Operating Voltage.............................................................. 12 V
Output Impedance ..........................................................470 Ω
IR Out LCD Remote Terminal
Maximum Output Current ............................................20 mA
Operating Voltage................................................................ 5 V
Output Impedance ..........................................................470 Ω
IR Repeater Control Terminal
Maximum Output Current ............................................20 mA
Operating Voltage.............................................................. 12 V
Output Impedance ..........................................................470 Ω
SHAPE OF PLUG TO BE CONNECTED:
IR IN/OUT SPECIFICATION:
RELAY CONTROL SPECIFICATION:
General
Power consumption ............................................................ 6.2 A
AC outlet
Switched ...................................... 2 (total 90 W, 0.75 A max.)
Dimensions................................................ W: 440 mm(17-5/16”)
H : 191 mm (7-1/2”)
D : 416 mm (16-3/8”)
Weight (Net)..................................................... 19.9 kg (43.8 lb)
IR Receiver In and IR Out
LCD Remote
IR Repeater Out
Stereo mini plug Mono mini plug
Sleeve
Sleeve
Ring
Tip
Tip
Kenwood follows a policy of continuous advancements in
development. For this reason, specifications may be changed
without notice.
Full performance may not be exhibited in extremely cold
locations (below 0 deg. C).
To Tip 0V 0V +12V
To Ring 0V +12V
To Sleeve Ground Ground Ground
When a specific
button on one of
PowerTouch III’s
screen is
pressed.
Power
Off
Power
On
status