Filter
Top Products
41
Application section
¢4
–P.CALL–
CURSOR
ENTER
SET
4, ¢
CURSOR
Bass Boost and tone control
The Bass Boost function allows you to enhance
or compensate for the low frequencies and the
tone control function is used for fine adjust-
ments of the bass (low frequencies) and treble
(high frequencies).
Selecting the bass boost
(NV-500 only )
1
Display the "Function" menu.
2
Select the "Listen Mode".
3
Select the message to be
displayed, "Bass Boost
Off" or "Bass Boost On".
4
Select the message to be
displayed, "On" or "Off",
and press the SET key.
Tone adjustment
The lowest and highest frequency bands can be
adjusted independently.
1
Display the "Function" menu.
2
Select the "Tone Control".
3
Select the message to be
displayed, "Bass" or
"Treble".
4
Adjust the level of the
selected tone.
5
Press the ENTER key
The adjustment range is be-
tween +4 and -4.
Tone control and sound field effect adjustment
÷ The sound field effects of Bass Boost and tone
control cannot be used simultaneously.
The tone control setting is
switched off.
The tone control setting is
recalled whenever the Bass
Boost setting is switched off.
The bass boost setting is
switched off.
CURSOR
SET
CURSOR
SET
CURSOR
SET
CURSOR
SET
CURSOR
SET
CURSOR
SET
ENTER