Kenwood 600 Stereo System User Manual


 
13
Preparation section
IR ON/STANDBY
CURSOR
SET
TV
VIDEO1
VIDEO2
CD
TUNER
TAPE
FUNCTION
TV
VIDEO1
VIDEO2
CD
TUNER
TAPE
FUNCTION
HOME
SET
SET
CURSOR
CURSOR
SET
TV
VIDEO1
VIDEO2
CD
TUNER
TAPE
FUNCTION
TV
VIDEO1
VIDEO2
CD
TUNER
TAPE
FUNCTION
j[˚
Basic configuration of the remote control menu
The provided remote control unit has a large LCD
screen to allow interactive remote control operation.
A variety of operations can be remote controlled by
performing selection in the menu screens.
Screen configuration
(Example when selecting the stereo mode of the
tuner)
Basic screen
Shows the selected input,
recording condition, etc.
Operation of remote control unit
Input selected
on the main unit
Press the SET key to
go to a menu screen.
Press the CURSOR keys to move
up and down.
The selected items can be re-
mote controlled. The information
related to this item is shown on
the display.
Indicates the pres-
ence of next page
Indicates the presence
of previous page
Press the CURSOR keys
to select a menu item.
Press the SET key to go to
the next screen.
Select an item with the CURSOR key
and press the SET key to set the
selection.
Menu screen Selection screen
:Item being selected with the CURSOR keys
:Item that can be selected
:Item that cannot be selected under the current
condition
How to use the HOME key
Pressing the HOME key in the mid-
dle of selection returns to the basic
screen.
How to use the CONFIRM/DEMO key
The remote control unit displays information while holding
communications with the main unit. Pressing the CONFIRM/
DEMO key allows you to reconfirm the current situation.
Selecting an input using the CURSOR key
It is usually the INPUT key that is used to select an input such as CD, TAPE or TUNER from the remote control
unit. However, the input to be recorded can also be selected using the CURSOR keys. Use the CURSOR key
as described below.
1
Switch power ON.
2
Press one of the CURSOR
keys to select an input.
3
Press the SET key to set the
selection.
4
Press the BAND key.
(The input is switched as
selected and the source
starts to play.)
IR POWER
or