Kenwood 600 Stereo System User Manual


 
17
Basic section
PHONES
INPUT
ENTER
¢4
–P.CALL–
VIDEO2
CD
TUNER
TAPE
FUNCTION
MUTE
CURSOR
SET
Muting the sound temporarily
÷ Press again to resume the original volume.
÷ This is also cancelled when the volume is changed.
MUTE
Listening through headphones
Insert the headphone plug into the “PHONES”
jack.
÷ Headphones with a stereo mini plug can be connected.
÷ The sounds from all speakers are cut off.
Standby mode
While the standby indicator of the unit is lit in red or
amber, a small amount of current is flowing into the
unit’s internal circuitry to back up the memory. This
condition is referred to as the standby mode of the unit.
While the unit is in the standby mode, it can be turned
ON from the remote control unit.
One-touch operation
With this feature, when the play key for the CD or TAPE
input or the BAND key for the TUNER input is pressed,
the power of the unit is switched ON automatically.
÷ When the CD or TAPE input selected while a disc or
tape has already been loaded, its playback also starts
automatically.
STANDBY/TIMER indicator
When power is STANDBY : Lights in red.
When power is ON : Lights in green.
During timer standby : Lights in amber.
When timer standby is initiated without set-
ting the current time of the day :
Blinks in green.
When the protection circuitry is activated :
Blinks in red. (In this case, unplug the
power cord and ensure that the
speaker cords are not short-circuited.)
When using the remote control unit, each press of
the INPUT key switches the input as shown below.
1 Press INPUT key
1 VIDEO1
2 VIDEO2
3 CD
4 TUNER
5 TAPE
2 Press 6(BAND) key
Adjusting the left and right volume balance
1
Display the "Function" menu.
2
Select "Balance".
3
Adjusting the left and right
volume balance
4
Set the adjusted balance.
The right
volume is
decreased.
The left
volume is
decreased.
Let's put out some sound
When the display of the remote control
unit shows nothing, information can be
displayed by pressing the HOME key.
CURSOR
SET