Filter
Top Products
English
|
27
Preset Equalizer curve select
You can select following Equalizer curve;
Equalizer curve Display
Natural “Natural”
User* “User”
Rock “Rock”
Pops “Pops”
Easy “Easy”
Top 40 “Top 40”
Jazz “Jazz”
Game “Game”
iPod (During iPod source only) “iPod”
* The Equalizer curve set in the section <Manual Equalizer
Control> is recalled.
1 Enter Preset Equalizer mode
Select “SOUND” > “Control” > “EQ” >
“Preset Equalizer”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Select the Equalizer curve
Turn the Control knob and push the center
when the desired item is displayed.
You can select from 22 Equalizer curve types for
iPod when “iPod” is selected.
Exit Preset Equalizer mode.
Select the iPod Equalizer curve
1. Enter iPod Equalizer mode
Press the Control button.
2. Select the iPod Equalizer curve
Turn the Control knob and push the center
when the desired item is displayed.
Exit Preset Equalizer mode.
⁄
• You can select for each source.
Manual Equalizer Control
You can adjust following Equalizer Control items;
Adjustment Item Display Range
Band 1
“BAND1”
62.5 Hz
Band 2
“BAND2”
250 Hz
Band 3
“BAND3”
1 kHz
Band 4
“BAND4”
4 kHz
Band 5
“BAND5”
16 kHz
Band level “GAIN” -9 –+9 dB
Bass Effect* “EFCT” “ON”/ “OFF”
*Can be only set for “BAND1”.
1 Enter Manual Equalizer Control mode
Select “SOUND” > “Control” > “EQ” >
“Manual Equalizer”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Select the band you want to set
Turn the Control knob.
3 Select the item you want to set
Push the Control knob towards up or down.
Move the cursor “>” to the desired item.
4 Set the value
Turn the Control knob.
5 Repeat steps 2 to 4 to complete the Equalizer
curve.
To change the band, move the cursor “>” to “band#”.
6 Exit Manual Equalizer Control mode
Press the [FNC] button.
⁄
• When “iPod” is selected in the section <Preset Equalizer
curve select> (Page 27), Manual Equalizer Control is
disabled.
• You can select for each source.