Filter
Top Products
English
|
25
Cabin selection
You can compensate the delay of the sound arrival
time by selecting your environment from the
following car types;
Car type Display
Not compensating. “OFF”
Compact car “Compact”
Full size car “Full Size Car”
Station wagon “Wagon”
Minivan “Minivan”
Sport-utility vehicle “SUV”
Long Minivan “Minivan (Long)”
1 Enter Cabin select mode
Select “SOUND” > “Setup” > “Cabin”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Select the car type
Turn the Control knob and push the center
when the desired item is displayed.
Exit Cabin select mode.
⁄
• You can compensate the distances in more details by
using <DTA> (page 26) function.
Speaker setting
The speaker X’Over is automatically set when the
position and size of each speaker are selected from
the following items;
Item Range
Speaker Size Front “O.E.M.”, “10cm”, “13cm”, “16cm”, “17cm”,
“18cm”, “4x6”, “5x7”, “6x8”, “6x9”, “7x10”
Speaker Location Front “Door”, “On Dash”, “Under Dash”
Speaker Size Tweeter “None”, “Use”
Speaker Size Rear “None”, “O.E.M.”, “10cm”, “13cm”, “16cm”,
“17cm”, “18cm”, “4x6”, “5x7”, “6x8”,
“6x9”, “7x10”
Speaker Location Rear “Door”, “Rear Deck”
“Minivan”, “Minivan (Long)”:
“2nd Row”, “3rd Row”
Speaker Size Subwoofer “None”, “16cm”, “20cm”, “25cm”, “30cm”,
“38cm Over”
Sound Setup
1 Enter Speaker setting mode
Select “SOUND” > “Setup” > “Speaker”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Select the speaker you want to set
Setting speaker Display
Front speaker “FRONT”
Rear speaker “REAR"
Subwoofer “SUB W"
Turn the Control knob.
3 Select the item you want to set
Item Setting overview
“FRONT” >“SIZE”
>“LOCATION”
>“TWEETER”
Speaker Size Front
Speaker Location Front
Speaker Select Tweeter
“REAR" >“SIZE”
>“LOCATION”
Speaker Size Rear
Speaker Location Rear
“SUB W" >“SIZE” Speaker Size Subwoofer
Push the Control knob towards up or down.
4 Set the value
Turn the Control knob.
5 Repeat steps 2 to 4 to complete the speaker
settings.
6 Exit Speaker setting mode
Press the [FNC] button.