Filter
Top Products
10
|
KDC-XBT8013U/ KDC-XBT8013UL/ KDC-X7013U/ KDC-X7013UL
Display Settings
Display Type Selection
Shown below are examples of display types.
Display Display Type
“TYPE [A]” Displays 4 to 5 lines of text.
“TYPE [B]” Displays a line of text and video.
“TYPE [C]” Displays a line of text and the spectrum analyzer.
“TYPE [D]” Displays the clock.
1 Enter Display type selection mode
Select “SETUP” > “Display Select” > “Type
Select”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Select the Display type
Turn the Control knob.
3 Exit Display type selection mode
Press the [FNC] button.
⁄
• For how to switch the text display information, refer to
<Text Display Selection> (Page 10).
• When “TYPE [A]” is selected, the status (ON/OFF indicator
of each function) can be displayed on the first line, and
the icon of the currently selected source and the text
information title can be displayed on the left side by the
following <Function Control> (page 6) operation.
Status display: Select “SETUP”
> “Display Select” > “Status”
Side display: Select “SETUP”
> “Display Select” >
“Side Select”
• When “TYPE [C]” is selected, the spectrum analyzer can
be switched by the following <Function Control> (page
6) operation.
: Select “SETUP”
> “Display Select” > “Graphic Select”
Text Display Selection
Changes displayed information on each source
following;
In Tuner source
Information Display
Frequency “Frequency”
Spectrum analyzer & Clock (“TYPE [A]/[B]”)
or Clock (“TYPE [C]”)
“Speana/Clock”
or “Clock”
Date “Date”
Blank “Blank”
In CD & External disc source
Information Display
Disc title “Disc title”
Track title “Track title”
Play time “P-Time”
Spectrum analyzer & Clock (“TYPE [A]/[B]”)
or Clock (“TYPE [C]”)
“Speana/Clock”
or “Clock”
Date “Date”
Blank “Blank”
In Audio file/ iPod source
Information Display
Title & Artist name “Title/Artist”
Album & Artist name “Album/Artist”
Folder name “Folder name”
File name “File name”
Play time “P-Time”
Play time bar (iPod only)* “Time Bar”
Spectrum analyzer & Clock (“TYPE [A]/[B]”)
or Clock (“TYPE [C]”)
“Speana/Clock”
or “Clock”
Date “Date”
Blank “Blank”
* Can be displayed only on the bottom line of “TYPE [A]”
text.
In Standby/ Auxiliary input source
Information Display
Source name “Source Name”
Clock “Clock”
Date “Date”
Blank “Blank”
1 Enter Text display selection mode
Select “SETUP” > “Display Select” >
“Text Select”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Select the text display part
Push the Control knob towards up or down.
The selected text display part blinks.