Filter
Top Products
18
|
KDC-XBT8013U/ KDC-XBT8013UL/ KDC-X7013U/ KDC-X7013UL
Operation of hands-free phoning
Make a voice dialing call
1 Enter voice recognize mode
Select “BT” > “Voice Recognize”.
For how to select Function Control item, refer to
<Function Control> (page 6).
“Ready” is displayed.
2 Press the Control knob.
“PB Name?” is displayed.
When a beep is heard, utter the name within 2
second.
3 “PN Type” is displayed.
When a beep is heard, utter the category within 2
second.
4 Make a call
Press the Control knob for at least 1 second.
• This step is the same as step 3 of the procedure in
<Calling a number in the Phone Book>. You can make a
call or select a category.
Calling a number in the call log
1
Enter dialing method mode
Press the [ ] button.
2 Select the call log mode
Press the Control knob.
Select the “OUT-CALL” (outgoing call), “IN-CALL”
(incoming call), or “MISSED CALLS” (missed call)
display.
3 Select a name or phone number
Turn the Control knob or push it towards up or
down.
Switching between Display Modes
Press the [FNC] button.
Pressing this button each time switches between
name and telephone number.
4 Make a call
Press the Control knob for at least 1 second.
⁄
• The outgoing call list and the incoming call list, and the
missed call list are the lists of calls originated from and
received at this unit. They are not the ones stored in the
cell-phone memory.
Function of KDC-XBT8013U/ KDC-XBT8013UL
KDC-X7013U/ KDC-X7013UL with KCA-BT200 (Optional Accessory)
Calling a number in the Phone Book
1
Enter dialing method mode
KDC-XBT8013U/ KDC-XBT8013UL:
Press the [
] button.
KDC-X7013U/ KDC-X7013UL:
Press the [ ] button for at least 1 second.
2 Select the Phone Book mode
Press the Control knob.
Select the “INITIAL” display, proceed to step 3.
Select the “PHONE BOOK” display, proceed to step
4.
3 Select the initial to be searched for
Operation type Operation
Move to the next character. Turn the Control knob or push it towards
right or left.
Move to the next row. Push the Control knob towards up or
down.
Determine the selected initial. Press the Control knob.
4 Select the name
Operation type Operation
Move to the next phone
number.
Turn the Control knob or push it
towards up or down.
Move to the next name. Push the Control knob towards right
or left.
Switching between Display Modes
Press the [FNC] button.
Pressing this button each time switches between
name and telephone number.
5 Make a call
Press the Control knob for at least 1 second.
⁄
• During search, a non-accent character such as “u” is
searched for instead of an accent character such as “ü”.