Filter
Top Products
30
|
English
Sound management features
Function of the KDC-X979
Audio Setup Memory (PRO mode)
1
Selects the PRO mode of Audio setup
See the 'Audio Setup' (page 48) and select "Audio
Setup: PRO".
2 Select the source for adjustment
Press the [SRC] button.
3 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "AD SET" is
displayed above the [3] button.
Refer to 'Notes on Multi-function Key System'
(page 9).
4 Enter Audio Setup mode
Press the [3] ("AD SET") button.
5 Select the Adjustment item section
Press the [NEXT] button.
Repeatedly press the button until the desired
Adjustment item is displayed above the [2] — [5]
button.
6 Select the Audio Setup item for adjustment
Press the [2] — [5] button.
Adjust the audio setup by referring to the 'Audio
Setup (PRO mode)' (page 28).
7 Select the Memory item section
Press the [NEXT] button.
Repeatedly press the button until "MEMORY" is
displayed above the [2] button.
8 Select the Memory item
Press the [2] ("MEMORY") button.
9 Stores the adjusted audio setup value in
memory
Press the [2] ("USER")/ [3] ("INST") button for
at least 2 seconds.
The "MEMORY" display blinks 1 time.
"USER": The values are erased from memory if the
battery is removed or if the reset button
is pressed.
"INST": The values are held in memory even if the
battery is removed or if the reset button
is pressed.
10 Exit Audio Setup mode
Press the [6] ("RTN") button.
Audio Setup memory Recall
1
Enter Audio Setup mode
Press the [3] ("AD SET") button.
2 Select the Recall section
Press the [NEXT] button.
Repeatedly press the button until "CALL" is
displayed above the [3]/[5] button.
3 Call the Audio setup memory and select an
item to call the memory value
Press the [3]/ [5] ("CALL") button.
• If you have set the Audio Setup to "Audio Setup: PRO"
using 'Audio Setup' (page 48), press button [3]. If you
have set the Audio Setup to "Audio Setup: Easy", press
button [5].
4 Recalls the value from memory
Press the [2] ("USER")/ [3] ("INST") button.
5 Exit Audio Setup mode
Press the [6] ("RTN") button.