Filter
Top Products
24
|
English
General features
Function of the KDC-MP925/KDC-X879
System Q
You can recall the best sound setting preset for
different types of music.
1 Select the source to set
Press the [SRC] button.
2 Select the Sound type
Press the [Q] button.
Each time the button is pressed the sound
setting switches.
Sound setting Display
SRS WOW "SRS WOW"
Natural "Natural"
User memory "USER"
Rock "ROCK"
Pops "POPS"
Easy "EASY"
Top 40 "TOP 40"
Jazz "JAZZ"
• User memory: The values set on the 'Audio Control'
(page 22).
• Each setting value is changed with the 'Speaker
Setting' (page 24).
First, select the speaker type with the Speaker setting.
• When 'Dual Zone System' (page 25) is set to ON, the
setting of SRS WOW is disabled.
Function of the KDC-X979
System Q
You can recall the best sound setting preset for
different types of music.
1 Select the source to set
Press the [SRC] button.
2 Select the Sound type
Press the [Q] button.
Each time the button is pressed the sound
setting switches.
Sound setting Display
Natural "Natural"
Rock "ROCK"
Pops "POPS"
Easy "EASY"
Top 40 "TOP 40"
Jazz "JAZZ"
User memory "USER"
Installer "INSTALLER"
• User memory: The values set on the 'Audio Setup (PRO
mode)' (page 28).
• Installer: The values set on the 'Audio Setup (PRO
mode)' (page 28).
• Each setting value is changed with the 'Audio Setup
(PRO mode)' (page 28).
First , select the Cabin size and the speaker type with
'Audio Setup (Easy mode)' (page 28). Refer to 'Notes
on Sound Management System' (page 12).
Function of the KDC-MP925/KDC-X879
Speaker Setting
Fine-tuning so that the System Q value is optimal
when setting the speaker type.
1 Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2 Enter Speaker Setting mode
Press the [Q] button.
"SP SELECT" is displayed.
3 Select the Speaker type
Press the [2] — [5] button.
Each time the button is pressed the setting
switches as shown below.
Speaker type Button Display
OFF [2] "OFF"
For 5 & 4 in. speaker [3] "5/4"
For 6x9 & 6 in. speaker [4] "6*9/6"
For the OEM speaker [5] "OEM"
4 Exit Speaker Setting mode
Press the [Q] button.