Kenwood HM-333 Stereo System User Manual


 
45
Timer operation
Application section
1 Select the mode.
(1) Select "PLAY" or "AI PLAY".
(2) Set it.
Set the ON time then the OFF time.
÷ In other areas than the U.K. and Europe the clock
shows the time of the day in the 12-hour system.
÷ For each of the ON time and OFF time, enter the figure
of "hour" by performing steps 1 and 2 then enter the
figure of "minute" in the same manner.
÷ If you make a mistake, press the menu key and restart
from step 2.
3
Make the desired reservation.
4
ON TIME
OFF TIME
1 Adjust the time.
2 Set it.
The time is
advanced
The time is
returned
1 "PLAY"
(Timer play)
2 "REC"
3 "AI PLAY"
(Timer play with gradually
increasing volume
2 Select the input source.
(1) Select the source to be played.
(2) Set it.
1 "TUNER"
(Broadcasts)
2 "CD"
3 "TAPE"
4 "AUX"
(External input / video, etc.)
1 Select the mode.
(1) Select "REC".
(2) Set it.
1 "PLAY"
2 "REC"
3 "AI PLAY"
2 Select the input source.
(1) Select what is to be recorded.
(2) Set it.
1 "TUNER"
(Broadcasts)
2 "AUX"
(External input / video, etc.)
Continued on next page
volume / multi control
set
/
demo
Continued on next page
For timer playback or AI timer playback
For timer recording
\
\
set
/
demo
\
\
set
/
demo
\
\
set
/
demo
\
\
set
/
demo