Kenwood HM-333 Stereo System User Manual


 
28
Recording on TAPE
Basic section
1. Load a tape in deck.
2. Select the tape transport direction.
1 Press the TAPE 2 3 key corresonding to the desired direc-
tion.
2 Stop playback.
To reverse the transport direction :
÷ When recording is started, the tape is transported in the direction selected
in this step.
Check the tape transport direction indicator.
)
÷ Search the position you want to start recording in advance.
1 Press the area marked 0 push open to open the cassette
holder.
2 Insert a tape.
3 Press the area marked 0 push open to close the cassette
holder.
Start recording/ Pause the recording
Stop the recording
Stop the recording
Recording on TAPE
11
÷ Remove tape slack before loading.
11
Do not use a cassette with more than 90-minute recording time, for the
tape used with such a cassette is very thin and tends to cause troubles
such as entanglement around the pinch roller or cutting of tape.
33
22
44
55
0
push open
TAPE
2 3
22
The tape deck of the unit can record signals only on Normal (Type ) and High (Type ) tapes. It cannot record on
Metal (Type
) tapes.